Adding the right counterweight can make a camera gimbal easier to balance, smoother to operate, and less demanding on its motors. The best choice depends on your camera setup, the amount of correction needed, and the mounting system your stabilizer supports.
We selected 10 camera counterweights ranging from compact single weights to adjustable kits for popular DJI, Zhiyun, Moza, and 15mm rod configurations.
Best 10 Camera Counterweights Picks for 2026
Flexible Gimbal Balancing
NEEWER GA001 Counterweight Kit
- Includes two 100g weights and a mounting clamp
- Multiple 1/4-inch holes enable flexible positioning
- Compatible with selected DJI, ZHIYUN, and Moza gimbals
Best For: Long-lens gimbal setups needing adjustable 200g counterweight capacity
Heavy-Duty 15mm Rod Support
Acouto 15mm Rod Counterweight Set
- Includes two 2.2lb (1kg) counterweight blocks
- Designed for 15mm rods and shoulder rigs
- 60mm track-hole spacing supports compatible setups
Best For: Shoulder-mounted camera rigs requiring substantial rear counterbalance
Expandable Single Weight
SMALLRIG AAW2285 200g Counterweight
- Adds 200g to compatible gimbal setups
- Threaded ends allow additional weights to stack
- Mounting plate is sold separately
Best For: Fine-tuning balance on compatible SMALLRIG gimbal plate systems
Best Stackable Option
SMALLRIG 100g Removable Counterweight
- Stackable 1/4-inch-20 connection
- Textured surface improves grip
- Stainless-steel construction
Best For: Expandable gimbal balancing setups
Best Two-Pack for Zhiyun
NICEYRIG 3.5 oz Counterweights
- Two 3.5-ounce counterweights
- Stackable 1/4-inch-20 connections
- Smooth stainless-steel finish
Best For: Compatible Zhiyun gimbal balancing
Best Adjustable Kit
Universal Gimbal Counterweight Kit
- Adjustable clamp fits arms within 16mm
- Includes two 21g counterweights
- Seven 1/4-inch mounting holes
Best For: Flexible gimbal balancing with changing lenses and accessories
Best Single Weight
- Single 3.5-ounce balancing weight
- 1/4-inch screw and threaded hole
- Stainless-steel, corrosion-resistant build
Best For: Fine-tuning compatible gimbal setups with one added weight
Best Two-Piece Set
NICEYRIG 50g Counterweight Set
- Two 50g weights, 100g total
- Designed for heavier-sided cameras
- Built-in 1/4-inch mounting hardware
Best For: Balancing heavier camera and gimbal combinations
Flexible Gimbal Balancing – NEEWER GA001 Counterweight Kit
For camera counterweights designed around gimbal use, the NEEWER GA001 combines a clamp with two 100g weights. Its adjustable mounting positions and stackable design make it practical for balancing long-lens setups on compatible stabilizers.
Best For: Gimbal users who need flexible positioning and two 100g weights for long-lens balancing.
Pros:
- Compatible with several DJI, ZHIYUN, and Moza gimbal stabilizers.
- Multiple 1/4-inch threaded holes support different mounting positions.
- Two 100g weights can be stacked, and the clamp installs without tools.
- Aluminum-alloy construction is designed for corrosion resistance.
Cons:
- The kit is intended for compatible gimbals rather than general-purpose camera rigs.
- It includes two 100g weights, so heavier balancing needs may require additional equipment.
- The product is not water resistant.
The GA001 is a focused choice among camera counterweights when compatibility and mounting flexibility matter most. Check your stabilizer and the required balance before buying.
Heavy-Duty 15mm Rod Support – Acouto 15mm Rod Counterweight Set
The Acouto set is a substantial camera counterweight option for 15mm rod systems and shoulder-mount rigs. Two 2.2-pound blocks let you redistribute weight for a more stable, comfortable setup during longer shoots.
Best For: Shoulder rigs and 15mm rod configurations that need significant, adjustable counterbalancing.
Pros:
- Includes two 2.2-pound (1kg) counterweight blocks.
- Designed for 15mm rods and many shoulder-mount rigs.
- The 60mm track-hole spacing supports integration with compatible equipment.
- CNC-processed aviation aluminum alloy construction is built for durability.
Cons:
- At approximately 2.14kg total item weight, it is much heavier than compact gimbal weights.
- Compatibility depends on a 15mm rod system and suitable shoulder-rig hardware.
- The set is not water resistant.
Choose the Acouto when your rig calls for serious rear weight rather than a small gimbal accessory. Its size and weight make it better suited to supported shoulder configurations than lightweight handheld kits.
Compact Gimbal Kit – SMALLRIG 3125 Counterweight Kit
The SMALLRIG 3125 is a compact camera counterweight kit for balancing long-lens cameras on compatible gimbals. It includes a mounting clamp and two 100g weights, with 1/4-inch-20 connections for adding or adjusting the counterweight arrangement.
Best For: Gimbal operators who want a compact, stackable kit for popular DJI, ZHIYUN, and Moza stabilizers.
Pros:
- Designed specifically for balancing cameras with long lenses on gimbals.
- Includes a mounting clamp and two 100g counterweights.
- Multiple 1/4-inch-20 holes allow stacking for different balance requirements.
- Aluminum-alloy and stainless-steel construction offers corrosion resistance.
Cons:
- The listed maximum weight recommendation is 100g, which may limit heavier setups.
- It is designed for compatible stabilizers rather than universal rig mounting.
- The kit is not water resistant.
The 3125 is a sensible pick if you want a small, purpose-built gimbal solution with expansion through threaded connections. Confirm the clamp and stabilizer compatibility before selecting it for your rig.
Expandable Single Weight – SMALLRIG AAW2285 200g Counterweight
The SMALLRIG AAW2285 is a single 200g camera counterweight for compatible gimbal mounting plates. Its threaded screw and hole allow additional weights to be stacked, making it useful when you want to fine-tune balance rather than buy a complete clamp kit.
Best For: SMALLRIG and compatible gimbal setups that need a single 200g add-on weight.
Pros:
- Provides a 200g counterweight for adjusting gimbal balance.
- 1/4-inch-20 screw and threaded hole support stacking.
- Stainless-steel construction is corrosion resistant.
- Textured lines on the surface increase friction for installation and removal.
Cons:
- A compatible mounting plate is sold separately.
- It is a single weight, so a complete setup may require additional hardware or weights.
- Compatibility is focused on listed DJI, Zhiyun, and other gimbal mounting plates.
The AAW2285 works well as an incremental balancing accessory for an existing compatible plate system. Factor in the separate mounting plate when comparing its total setup cost with complete camera counterweight kits.
Best Adjustable Set – NICEYRIG 150g Gimbal Counterweights
For camera counterweights that can adapt to different balancing needs, this NICEYRIG set includes separate 100g and 50g pieces. The removable design and 1/4-inch connections make it practical for adjusting weight on compatible DJI Ronin and Zhiyun gimbals.
Best For: Filmmakers who want two weight options for fine-tuning a heavy-sided camera setup.
Pros:
- Includes 100g and 50g counterweights for flexible adjustment.
- Uses a 1/4-inch screw and threaded hole for removable installation.
- Compatible with a range of DJI Ronin and Zhiyun stabilizers.
- Stainless-steel construction offers corrosion resistance.
Cons:
- Mounting clamp compatibility is listed for NICEYRIG clamps 323 and 324.
- Not water resistant.
This is a versatile choice when one fixed counterweight may not suit every camera configuration. Its two-piece format is especially useful for incremental balancing, provided you have a compatible mounting clamp.
Best Stackable Option – SMALLRIG 100g Removable Counterweight
This SMALLRIG counterweight is designed for balancing cameras on DJI Ronin and Zhiyun gimbal stabilizers. Its 1/4-inch-20 screw and threaded hole allow compatible weights to be stacked, while the textured surface is intended to improve grip during installation and removal.
Best For: Gimbal users who need a stackable 100g weight with a friction-enhancing surface.
Pros:
- Stackable through the integrated 1/4-inch-20 screw and threaded hole.
- Textured surface is designed to increase friction.
- Made of corrosion-resistant stainless steel.
- Compatible with several DJI Ronin and Zhiyun stabilizers.
Cons:
- Counterweight mounting plate is sold separately.
- Additional 50g and 200g weights are optional rather than included.
- Not water resistant.
The AAW2284 makes sense for setups that may need additional weight later, since its connection design supports stacking. Remember to budget for a compatible mounting plate if your gimbal does not already have one.
Best Two-Pack for Zhiyun – NICEYRIG 3.5 oz Counterweights
These NICEYRIG camera counterweights come as a two-pack of 3.5-ounce pieces for balancing heavy-sided cameras on compatible Zhiyun gimbals. Each weight has a 1/4-inch-20 screw and threaded hole, allowing the quantity and position to be adjusted as needed.
Best For: Zhiyun Weebill and Crane users who need a two-piece counterweight solution.
Pros:
- Two-pack supports adjustment of weight quantity and position.
- 1/4-inch-20 screw and threaded hole allow additional weights to be added.
- Compatible with NICEYRIG mounting clamps 323 and 324.
- Stainless-steel body has a smooth, shiny surface.
Cons:
- Designed around a 3.5-ounce weight size rather than mixed weight sizes.
- Mounting clamp compatibility is specifically listed for NICEYRIG clamps 323 and 324.
- Not water resistant.
This two-pack is a straightforward pick for compatible Zhiyun stabilizers when you want matching weights and the option to add more. It is less flexible than a mixed-size set, but the paired format can simplify repeatable balancing.
Best Adjustable Kit – Universal Gimbal Counterweight Kit
For creators comparing camera counterweights, this kit is a flexible option when lenses or accessories make a gimbal difficult to balance. Its adjustable clamp, repositionable mounting points, and included weights support a range of setups.
Best For: Gimbal users who want adjustable positioning and two included weights for balancing changing camera configurations.
Pros:
- Adjustable clamp fits gimbal arms within 16mm and supports several DJI, Zhiyun, and other gimbals.
- Includes two 21g counterweights for common balancing needs.
- Seven 1/4-inch threaded holes provide multiple mounting positions.
- Tool-free installation and an anti-scratch pad simplify setup.
Cons:
- The clamp is specified for arms within 16mm, so compatibility should be checked before buying.
- The included 21g weights may not cover every heavier setup without additional weight.
Choose this kit if versatility matters most. Its clamp-based design and threaded mounting options make it more adaptable than a single fixed counterweight.
Best Single Weight – NICEYRIG 3.5 oz Counterweight
This NICEYRIG unit is a straightforward choice for camera counterweights when you need to fine-tune a heavy-sided gimbal setup. The 3.5-ounce stainless-steel weight has a 1/4-inch screw and threaded hole for positioning or expansion.
Best For: Shooters who need one durable 3.5-ounce weight for compatible gimbal mounting clamps.
Pros:
- Provides 3.5 ounces of counterweight for balancing heavy-sided cameras.
- Built-in 1/4-inch screw and threaded hole allow attachment and additional weights.
- Compatible with NICEYRIG clamps 323 and 324.
- Stainless-steel construction offers corrosion resistance.
Cons:
- This listing includes one unit, so larger setups may require additional purchases.
- Compatibility is centered on specified DJI, Zhiyun, and NICEYRIG clamp setups.
It is a practical single-weight solution for users who already have a compatible clamp and want a defined 3.5-ounce increment rather than a full balancing kit.
Best Two-Piece Set – NICEYRIG 50g Counterweight Set
For camera counterweights aimed at heavier-sided cameras, this NICEYRIG set supplies two 50g pieces for a combined 100g. The built-in 1/4-inch hardware lets users add the appropriate quantity and works with compatible mounting clamps.
Best For: Gimbal users balancing heavier cameras such as BMPCC 4K or 6K setups on supported stabilizers.
Pros:
- Two 50g weights provide a total of 100g for more substantial balancing needs.
- Built-in 1/4-inch screw and threaded hole support attachment and expansion.
- Compatible with NICEYRIG mounting clamps 323 and 324.
- Stainless-steel construction is corrosion resistant.
Cons:
- The set does not include a mounting clamp.
- It is not water resistant according to the supplied details.
- Compatibility should be confirmed for the specific gimbal and camera combination.
This set suits users who need more weight than a small single counterweight provides. Its two-piece format also allows the amount to be adjusted between one or both weights.
How We Picked These Camera Counterweights
We focused on compatibility, adjustability, mounting security, and practical weight options. The lineup includes dedicated counterweights for DJI Ronin and Zhiyun gimbals, universal clamp-based kits, and 15mm rod accessories for shoulder rigs and cinema-style builds.
We also considered whether a product offers one fixed weight or multiple pieces. Adjustable sets are generally more useful when you change lenses, cages, batteries, or other accessories, while single weights can be preferable for a repeatable setup with a known balance problem.
Quick Comparison
| Type | Best For | Main Advantage |
|---|---|---|
| Multi-piece gimbal kit | Changing camera configurations | Flexible weight adjustment |
| Single 100g–200g weight | Small balance corrections | Simple and lightweight |
| 150g set | Moderate correction | Useful combined or separately |
| 3.5-ounce weight | Heavier camera or lens setups | More substantial counterbalance |
| 15mm rod kit | Shoulder and cinema rigs | Works with rod-based accessories |
Key Buying Factors for Camera Counterweights
Compatibility and Mounting
Check the exact gimbal model and mounting method before buying. Some weights use a dedicated clamp, while others attach through a 1/4-inch thread or a camera cage. A product listed as compatible with one Ronin or Zhiyun generation may not fit every variation without an additional mount.
Weight and Adjustability
Use the smallest effective weight whenever possible. Excess weight can increase motor strain, reduce battery runtime, and make the rig harder to handle. Sets with separate 50g, 100g, or 200g pieces make fine adjustments easier than a single heavy block.
Clearance and Security
After installation, move each gimbal axis through its full range and check that the counterweight, clamp, and mounting screw do not contact the camera, motor, or cables. Choose a firmly secured metal mount and retighten it during long shoots, especially when the rig is frequently repositioned.
Rig Type
For a handheld gimbal, prioritize compact dedicated weights. For a shoulder rig or cage using 15mm rods, a rod-mounted kit may provide better positioning and more predictable balance. Confirm that the rod diameter and clamp spacing match your existing hardware.
Who Should Buy Which Camera Counterweights?
Choose a multi-weight gimbal kit if you regularly switch cameras, lenses, or accessories. A 100g or 150g option suits users who need a modest correction without adding unnecessary bulk. A 200g or 3.5-ounce weight is better for setups with a pronounced imbalance, provided the gimbal’s payload and motor limits allow it.
Buy a 15mm rod counterweight set for shoulder mounts and cinema rigs rather than handheld stabilizers. If you are unsure of the required amount, start with an adjustable kit and add weight gradually while checking balance in every axis. The best Camera Counterweights improve equilibrium without becoming a new source of excess load or interference.