Choosing the right 11×14 print washers can make a big difference in how cleanly your prints mount and how well they stay protected over time.
Below, we focus on practical options by size, material, and use case so you can match the washer to your frame, hardware, or display setup with confidence.
Best 10 11×14 Print Washers Picks for 2026
Heavy-Duty Sealing Choice
304 Stainless EPDM Bonded #14x1 Washers
- 304 stainless steel resists rust
- EPDM rubber helps seal and reduce vibration
- 100-piece pack for utility fastening
Best For: Self-drilling screws and construction fasteners
Framed Retro Decor Pick
Vintage Cows and Washerwoman 11x14 Poster
- Poster and white frame included
- Printed on fine art matte paper
- Laundry-room retro watercolor style
Best For: Ready-to-hang 11x14 laundry room wall art
Insulating Assortment Kit
White Nylon Flat Washers, 510 Pieces
- 510-piece assortment from M2 to M10
- Nylon helps prevent electrical shorts
- Portable compartment box for easy sorting
Best For: Appliance and electrical work that needs insulation
Nylon Spacer Pick
1/4" x 1.25" Nylon Flat Washer Pack
- Nylon flat washer with 1.25-inch OD
- 0.062-inch thickness for light spacing
- Pack of 10 for small projects
Best For: Small fasteners and lightweight nylon spacing
Stainless Metric Pick
M14 15mm ID Stainless Flat Washer Set
- 304 stainless steel construction
- 15mm ID, 25mm OD, 1mm thick
- Pack of 20 for fastening jobs
Best For: Metric bolts and corrosion-resistant fastening
Nylon Sealing Pick
14mm ID x 27mm OD Nylon Washer Pack
- PA66 nylon with smooth finish
- Designed for water, oil, and air sealing
- Pack of 50 for repair tasks
Best For: Faucets, hoses, and pipe sealing needs
Heavy-Duty Oversize Pick
NACX M14 x 44mm Stainless Fender Washers
- 304 stainless steel for corrosion resistance
- 44mm OD helps spread load over a wider area
- 3mm thickness for a sturdy fender-style washer
Best For: Wide-load applications that need a durable stainless washer
Value Pack Steel Option
binifiMux M14 40mm Fender Washers
- 20-piece pack for better quantity per order
- 40mm OD for a wide bearing surface
- Zinc-finished carbon steel construction
Best For: General-purpose fastening where pack size and value matter
Compact Stainless Pack
- 304 stainless steel for anti-corrosion use
- 60-piece pack for higher quantity
- 20mm OD and 1mm thickness for tight spaces
Best For: Compact fastening jobs needing a low-profile stainless washer
Heavy-Duty Sealing Choice – 304 Stainless EPDM Bonded #14×1 Washers
Wensilon (100 pcs) #14x1 Sealing Washers 304 Stainless Steel Neoprene EPDM Bonded 6.3x25mm
Check Price On AmazonIf you need 11×14 print washers for a project that calls for a tight seal and vibration resistance, this bonded washer set is built for fastening jobs rather than picture framing. The 304 stainless steel and EPDM rubber construction is designed to hold up against rust while helping improve grip and reduce noise on metal surfaces.
Best For: Self-drilling screws, construction work, electrical equipment, and industrial fastening where sealing matters.
Pros:
- 304 stainless steel helps resist rust and wear
- EPDM rubber side adds sealing and vibration damping
- Works with self-drilling screws across several work settings
- 100-piece box is convenient for repeated use
Cons:
- Not a decorative or art-print product despite the keyword overlap
- Made for #14×1 fasteners, so sizing must match
Overall, this is a practical bonded washer option when your priority is durability, friction, and a more secure fit. It is a good match for utility fastening tasks, but it is not intended for display or print-framing use.
Framed Retro Decor Pick – Vintage Cows and Washerwoman 11×14 Poster
If you’re shopping for 11×14 print washers as part of a laundry-room style refresh, this framed poster is a ready-to-hang decor option rather than hardware. It arrives with the poster and frame together, and the fine art matte paper print is meant to deliver an easy, polished wall accent.
Best For: Laundry rooms, bedrooms, offices, and gift buyers who want a framed 11×14 wall print.
Pros:
- Includes both poster and white frame for immediate display
- Printed in the USA on fine art matte paper
- Retro watercolor style suits laundry room decor
- Good gift option for housewarming or birthdays
Cons:
- It is wall art, not a functional washer product
- Only one size and frame style is listed here
This is the most style-focused option in the group, making it useful when the goal is a finished-looking 11×14 print setup. If you want a laundry-themed framed piece that is ready to hang, this one fits that need well.
Compact Metal Washer Pack – M14 304 Stainless Flat Washers
For buyers comparing 11×14 print washers with a more technical fastening use case, this M14 flat washer pack is a straightforward metal option. The 304 stainless steel build is meant to provide a wider bearing surface for bolts, screws, and nuts while helping reduce damage and looseness over time.
Best For: Outdoor construction, repair work, and load-spreading under M14 fasteners.
Pros:
- 304 stainless steel offers rust and corrosion resistance
- Flat design helps distribute load over a larger surface
- Suitable for indoor and outdoor repair applications
- Small 8-piece pack is easy to keep on hand for targeted jobs
Cons:
- Only 8 washers per pack, so it is not ideal for bulk use
- Black finish is listed in the notes, but the core use is utilitarian
In practical terms, this set is best when you need a standard flat washer for a specific M14 fit. It is a dependable choice for general fastening and maintenance tasks, but it is not an all-purpose assortment.
Insulating Assortment Kit – White Nylon Flat Washers, 510 Pieces
If you’re sorting through 11×14 print washers as a keyword, this nylon assortment is actually a practical insulating hardware kit for electrical and appliance work. The mix of eight common sizes gives you a flexible set of nonmetal washers that can help prevent electrical shorts while also providing a bearing surface.
Best For: Electrical connections, appliance repair, and DIY jobs that need nonconductive washers.
Pros:
- 510-piece assortment covers M2 through M10 sizes
- Nylon material is wear-resistant and moisture-resistant
- Helps prevent electrical shorts between metal surfaces
- Compartmented box makes sorting and carrying easier
Cons:
- Not intended for heavy metal fastening or sealing applications
- White nylon may not suit every visible installation
This is the most versatile kit here if your project needs insulating support across several screw sizes. It is especially useful for keeping a ready assortment on hand for appliances, interiors, and light-duty technical repairs.
Nylon Spacer Pick – 1/4" x 1.25" Nylon Flat Washer Pack
Hard-to-Find Fastener 014973171223 Specialty Nylon Washers, 0.250 x 1.250 x 0.062, Piece-10
Check Price On AmazonIf you need 11×14 print washers for a lightweight spacing or protection job, this nylon flat washer pack offers a compact, durable option. With a 1/4″ (#14) fastener size, 1.25-inch outside diameter, and 0.062-inch thickness, it works well when you want a smooth, nonmetal washer for general fastening and surface protection.
Best For: Small fasteners, light-duty spacing, and nylon washer applications where a 1.25-inch OD is needed.
Pros:
- Nylon construction for a lightweight, nonmetal washer.
- 1.25-inch outer diameter with 0.062-inch thickness.
- Pack of 10 for small repair or project needs.
- Flat washer design for general fastening use.
Cons:
- Only 10 pieces per pack.
- Made for No. 14 fasteners, so sizing needs to match closely.
- Not a metal washer if you need corrosion-resistant steel.
This is a practical choice if your project calls for a simple nylon flat washer rather than a heavier-duty metal part. The dimensions are clearly defined, which helps when matching against a specific fastener or spacer requirement.
Stainless Metric Pick – M14 15mm ID Stainless Flat Washer Set
For 11×14 print washers style jobs that need a compact metal spacer, this 304 stainless steel flat washer set is built around a 15mm inner diameter, 25mm outer diameter, and 1mm thickness. It’s a sensible pick for fastening applications where you want a smooth load-bearing surface and corrosion-resistant hardware for indoor or outdoor use.
Best For: Bolts, screws, and general fastening tasks that need a small stainless steel flat washer.
Pros:
- 304 stainless steel for rust and oxidation resistance.
- Precise 15mm ID, 25mm OD, and 1mm thickness.
- Smooth, burr-free finish for easier installation.
- Pack of 20 for repeated repair or assembly work.
Cons:
- Metric sizing may not suit inch-based hardware.
- Outside diameter is only 25mm, so it’s a compact washer.
- Not intended as a specialty seal or gasket.
This washer set is a straightforward fastening solution when you want stainless steel durability without extra complexity. The dimensions make it best for matched metric hardware and projects that benefit from a small, stable bearing surface.
Nylon Sealing Pick – 14mm ID x 27mm OD Nylon Washer Pack
If you’re shopping 11×14 print washers for sealing-style work, this nylon flat washer pack stands out for its 14mm inner diameter, 27mm outer diameter, and 2.5mm thickness. The PA66 nylon material is described as smooth, insulated, and resistant to impact, making it a practical option for hose, faucet, and pipe-related applications where a plastic washer is preferred.
Best For: Faucet, hose, and pipe sealing applications that need a nylon flat washer.
Pros:
- PA66 nylon material with smooth, burr-free surface.
- Useful for water, oil, and air sealing applications.
- 14mm ID and 27mm OD with 2.5mm thickness.
- Pack of 50 for larger repair needs.
Cons:
- Plastic construction is not ideal for every fastening job.
- Must match the bolt diameter closely for proper fit.
- Not suitable for strong acids or strong oxidants.
This is the most application-specific option in the set if your project needs a nylon washer that also functions as a seal. The larger pack size and stated resistance to fuel, lubricants, and weak chemicals add flexibility for household and automotive use.
Heavy-Duty Oversize Pick – NACX M14 x 44mm Stainless Fender Washers
If you need 11×14 print washers in a larger fender style for spreading load across a wider surface, this NACX M14 option is built around strength and corrosion resistance. The 44mm outer diameter and 3mm thickness make it a practical choice for jobs that need more bearing area under the fastener head, especially indoors or outdoors where rust resistance matters.
Best For: Users who want a sturdy stainless steel fender washer with extra load distribution and a thicker profile.
Pros:
- 304 stainless steel construction resists corrosion and rust.
- Large 44mm outer diameter helps distribute load well.
- 3mm thickness adds a sturdy, durable feel.
- Suitable for indoor and outdoor use.
Cons:
- M14 sizing may not fit smaller fasteners.
- Only 10 pieces per pack.
- May be larger than needed for lighter-duty jobs.
This is the strongest pick in the group if your priority is a wide, durable washer that improves load bearing. It is less about quantity and more about getting a robust stainless option for demanding fastening tasks.
Value Pack Steel Option – binifiMux M14 40mm Fender Washers
For shoppers comparing 11×14 print washers and wanting a practical metal fender washer pack, this binifiMux set focuses on value and quantity. The 40mm outer diameter and 2.5mm thickness give you a large contact area for bolts and screws, while the zinc finish adds some corrosion resistance for general-purpose fastening.
Best For: Buyers who want a larger steel washer pack for machinery or DIY fastening work.
Pros:
- 20-piece pack offers more quantity than the smaller sets.
- Large 40mm outer diameter provides good load distribution.
- Carbon steel construction gives solid strength.
- Zinc finish adds basic corrosion resistance.
Cons:
- Not stainless steel.
- 2.5mm thickness is slightly thinner than the thickest option here.
- May be overkill for small or light-duty repairs.
This is a straightforward pick if you want more washers in a fender style without moving to stainless steel. It balances size, strength, and pack count well for everyday mechanical or DIY use.
Compact Stainless Pack – uxcell M14 20mm Flat Washers
If your version of 11×14 print washers calls for a smaller, tighter-fitting washer rather than a fender style, this uxcell pack is the compact option to consider. These M14 304 stainless steel flat washers have a 20mm outer diameter and 1mm thickness, making them useful where space is limited and you still want corrosion-resistant support.
Best For: Tight-space fastening jobs that need a small, stainless flat washer in a large quantity pack.
Pros:
- 304 stainless steel resists rust and oxidation.
- 60-piece pack is the largest quantity in the group.
- Small 20mm outer diameter works in tight spaces.
- 1mm thickness suits low-profile applications.
Cons:
- Much smaller load-spreading area than fender washers.
- May not suit applications that need a wide bearing surface.
- Listed details include some inconsistent material information.
This is the best option if you care more about quantity and compact size than maximum surface coverage. It is a sensible stainless choice for repair work, plumbing, and other places where a slimmer washer fits better.
How We Picked the Best 11×14 Print Washers
We selected options based on size compatibility, material quality, thickness, outer diameter, and whether they make sense for light-duty display work or heavier fastening needs. For 11×14 Print Washers, the goal is a balanced fit: large enough to spread pressure, but not so oversized that they overwhelm the mounting area.
Quick Comparison
In this group, stainless steel choices are best for strength and corrosion resistance, while nylon options are better when you want a non-marring, lightweight spacer or insulator. Fender-style washers offer the widest load spread, and standard flat washers are the simplest choice when you want a cleaner, lower-profile look.
Key Buying Factors for 11×14 Print Washers
Size and Fit
Check inner diameter first so the washer fits your screw or bolt without excessive play. Then consider outer diameter and thickness, since those determine how much pressure is distributed across the surface.
Material
Stainless steel is the best all-around pick for durability and moisture resistance. Nylon works well for electrical isolation, delicate surfaces, and situations where you want to avoid scratching or metal-on-metal contact.
Surface Protection
If the print, frame, or backing board is vulnerable, choose a washer with a smooth edge and enough diameter to reduce point loading. Bonded sealing washers can also help when you need added grip or a tighter seal.
Application Type
Some shoppers need washers for framing or display hardware, while others need them for plumbing, cabinetry, or general fastening. The best choice depends on whether appearance, load distribution, corrosion resistance, or insulation matters most.
Who Should Buy Which 11×14 Print Washers?
If you need the most durable option, choose stainless steel flat or fender washers. If you are working with electronics or want a gentler contact point, nylon is the better fit. For broader pressure distribution on larger hardware, fender washers are usually the smartest pick. If your priority is simple, general-purpose mounting, standard flat washers will cover most everyday jobs without adding bulk.
For anyone comparing 11×14 Print Washers, start with fit and finish, then narrow by material and load needs. That approach makes it much easier to choose a washer that performs well and supports a cleaner final installation.